德国卡博carbo 模具刃口堆焊焊条总代理

  

  carbo 6w各种刃口堆焊使用

  

  

  

  tm-2000模具硬化堆焊用蓝翔牌焊材

  

特 性	对冲压模的金属磨耗非常有效,焊金第一次为奥氏体组织,第二层为高硬度的马氏体组织.火焰淬火钢也可以直接堆焊. the l stamping mould for abrasion is very effective for the first time, welding gold austenitic organization, the second is the high hardness martensite steel quenching. flame may also directly hardfacing.
用 途	直接堆焊各种铸铁材的模具. all sorts of cast iron material directly surfacing of mould.
规 格	2.6￠ 3.2￠ 4.0￠ 5.0￠

   lke-7号钢焊条(super-7)

  

特 性	耐冲击与金属间磨耗,直接焊于热处理后的cr12mov钢上,可全位置焊接,硬度hrc52~57.impact resistance and l abrasion, directly welded to the cr12mov after heat treatment, but the postttion on the steel welding, hardness hrc52-57
用 途	汽车大型模具硬面制做,冷冲模刀口焊接auto giant mould making, cold die cutting hardfaced welding.
规 格	2.6￠ 3.2￠