止或閥系列

Check Valve

此元件可執行「或」之功能，也就是說，假如有至少一個的信號出現，則即會有一輸出信號產生。

This device has “OR” logic function, ie, when at least 1 signal is detected, an output signal will be generated.

或閥用於從不同的位置來控制閥或氣壓缸時之用，亦用於「或」邏輯迴路上。

或閥有2輸入口(X,Y)及一輸出口(A)。它會自動封住沒有受壓之一端，如果兩個入口同時有信號，則較高之信號將接通至輸出口A上。

This “OR” valve can be applied to control Pneumatic Valve or Control Valve at different positions, also can be applied to the “OR” logic circuit. There are 2 Input Ports (X,Y) and 1 Output Port (A). It will automatically close the input port which is no pressure loading, if 2 input ports detect pressure signals simultaneously, it will take the stronger signal and open the output port for it.

此元件可執行「或」之功能，也就是說，假如有至少一個的信號出現，則即會有一輸出信號產生。

This device has “OR” logic function, ie, when at least 1 signal is detected, an output signal will be generated.

或閥用於從不同的位置來控制閥或氣壓缸時之用，亦用於「或」邏輯迴路上。

或閥有2輸入口(X,Y)及一輸出口(A)。它會自動封住沒有受壓之一端，如果兩個入口同時有信號，則較高之信號將接通至輸出口A上。

This “OR” valve can be applied to control Pneumatic Valve or Control Valve at different positions, also can be applied to the “OR” logic circuit. There are 2 Input Ports (X,Y) and 1 Output Port (A). It will automatically close the input port which is no pressure loading, if 2 input ports detect pressure signals simultaneously, it will take the stronger signal and open the output port for it.

ORS01/3-SUS

《產品介紹 note》：

型式/Type		ORS01/3-SUS
操作壓力/OPERATING PRESSURE		0.5～70 bar
環境溫度/TEMPERATURE RANGE		-15～80℃
適用流體/SUITABLE FLUID		一般中性流體 General neutral fluid
通過面積/ AREA		78mm2
通過孔徑/NORMAL DIAMETER		10mm
牙口徑/ CONNECTION		PT 3/8”
材質/MATERIAL	閥體/ VALVE BODY	不銹鋼/SUS
	油封/ SEAL	丁睛橡膠/Perbunan