防爆防腐应急荧光灯优质BYS-Y防爆防腐应急荧光灯产品-中国工控网(chinagkong.com)-中国工控行业门户网站

首页 > 供应 > 防爆电器 >

防爆防腐应急荧光灯优质BYS-Y防爆防腐应急荧光灯产品

来自：浙江中宏防爆电气有限公司

1人民币

发布时间：2012-3-9 关注次数：492

产品参数

商品详情

BYS-Y防爆防腐应急荧光灯(ⅡC)
BYS-Y Explosion-proof Corrosion-proof and Emergency Fluorescent Lamp (ⅡC)

1. 性气体环境危险场所：1区、2区；
2. 可燃性气体、蒸气级别：ⅡA、ⅡB、ⅡC；
3. 温度组别：T1~T6；
4. 户内、户外(IP65)；
5. 可配装双管荧光灯。

1. For the dangerous sites with explosive air mixture: 1division, 2division;
2. Flammable gas, steam class: ⅡA、ⅡB、ⅡC;
3. Temperatures classification: T1~T6;
4. Indoor and outdoor (IP65);
5. The fit with dual-pipe fluorescent lamp is available.

1. 壳体采用耐冲击、耐老化、阻燃、抗静电、强度高的SMC工程塑料模压成形或采用不锈钢板拉伸成形，外形美观、大方。
2. 灯罩采用聚碳酸酯注塑而成，透光性好，并能承受强撞击。
3. 外壳采用密封式结构，具有防水、防尘、防腐蚀等优点。
4. 内装电子镇流器和电感镇流器，及我公司独特的充砂型镇流器, 单脚荧光灯和双脚荧光灯可供用户随意选用。
5. 灯具具有开盖断电独具的电器联锁装置。
6. 照明应急两用灯。
7. 应急电源为免维护镍镉电池组，在正常供电条件下自动充电，事故断电或停电时应急灯自动转换为电池组供电，应急灯自动点亮。
8. 电缆布线。
9. 符合GB3836-2000、IEC60079、GB12476.1-2000、IEC62241标准要求。

1. The case body adopts impact-resistance, aging resistance, fire inhibiting, antistatic and high strength SMC engineering plastic.
2. The lampshade is casted by polycarbonate, with high transpareny and impact withstanding ; umbrella;
3. The shell is sealed, with performances of water-proof dust-proof, corrosion-proof;
4. Inner fitted is electronical ballast and inductive ballast and own special sand-filled ballast. The single- or dual-foot fluorescent lamp is for choice.
5. The light has the interlock device that can cut power in case of capping.
6. Dual-fuction light of lighting and emergency
7. Emergency power is non-maintenance nickel-cadmium battery under the normal power-supplying condition, the emergent lamp will turn on when the power lose because of accident or power faiulre.
8. cable wiring;
9. Suitable for GB3836-2000、 IEC60079、GB12476.1-2000、IEC61241 standard request.

光源种类 Luminous source sorts	防护等级 Protection category	防爆标志 Explosion-proofing maker	防腐等级 Corrosion-proofing grade	电缆外径 Cable's outside diameter (mm)
荧光灯 Fluorescent lamp	IP65	Exed Ⅱ CT6	WF2	Φ10

正常灯功率 Normal lmap power (W)	灯头型号 Socket model	防护等级 Protection category	防爆标志 Explosion- proofing maker	防腐等级 Corrosion- proofing grade	进线口螺纹 Inlet's thread
20×2	20	正常 Normal: AC220±10% 应急 Emergent: DC7.2	0.3	30	1.5
40×2	40	正常 Normal: AC220±10% 应急 Emergent: DC7.2	0.3	30	1.5