型号规格说明Model Specifications
型号 Model |
电机电压 Motor Volt |
电机功率 Motor power |
名义转速 Rated Speed |
油泵排量 Displacement |
溢流阀压力 System pressure |
油箱容量 Tank Capacity |
L (mm) |
JBZ-F1.2A1W2/WUAAD1 |
12VDC |
1.5KW |
2500RPM
|
1.2mL/r |
20MPa |
3.5L |
409 |
JBZ-F1.6B1W2/WUAAD1 |
1.6mL/r |
5L |
459 |
||||
JBZ-F2.1B1W2/WUAAD1 |
2.1mL/r |
5L |
459 |
||||
JBZ-F2.1B2A2/WUABD1 |
24VDC |
2KW |
2.1mL/r |
6L |
509 |
||
JBZ-F2.5C2A2/WUABD1 |
2.5mL/r |
8L |
579 |
||||
JBZ-F2.7C2A2/WUABD1 |
2.7mL/r |
8L |
579 |
说明Remark::
- 如需不同流量的泵、压力、电机功率等系统参数,请查看液压动力单元型号说明。
Please go to page 1 or consult our sales engineer for the different pump displacement,motor power or tank capacity.
2. 如需手动应急放油装置,请在订货时说明。
The manual override function is available on request.
注意事项Special Notes
- 本动力单元为S3工作制,不可连续运转,30秒开,270秒停。
1.The duty of this power unit is S3,i.e.,30 seconds on and 270 seconds off.
- 安装前必须保证油缸、油管、接头等液压元件清洁无任何杂质粘附。
2.Clean all the hydraulic parts concemed before mounting the power unit.
- 液压油粘度应为15-68CST,应清洁无杂质,推荐使用N46号液压油。
3.The viscosity of the oil shoud be 15-68 cst.
- 系统使用第一个100小时后,应更换液压油,以后每3000小时更换一次液压油。
4.Change the oil after the first 100 hours of using the power unit,then change the oil every 3000 hours
- 本液压动力单元适用于水平安装。
5.The power unit should be mounted horizontally.