台湾317青铜安全阀SV-B29、S3W-LR-中国工控网(chinagkong.com)-中国工控行业门户网站

首页 > 供应 > 安全阀 >

台湾317青铜安全阀SV-B29、S3W-LR

来自：上海东峰阀门有限公司

1000人民币

发布时间：2012-2-23 关注次数：365

产品参数

商品详情

	首页 - 产品展厅 - 进口阀门 - 台湾317阀门

『美国马克丹尼』『台湾317阀门』『日本VENN阀天』『日本KITZ(北泽)阀门』『日本TLV阀门』『德国ARI(艾瑞)阀门』『SpiraxSarco斯派莎克阀门』『美国parker阀门』『台湾(F.S)富山阀门』

	台湾317青铜安全阀SV-B27、S3W-A

	台湾317青铜安全阀SV-B29、S3W-LR

	台湾317青铜安全阀SV-S67

	台湾317青铜安全阀SV-S69

	台湾317青铜安全阀SV-B9A

	台湾317青铜安全阀SV-B9L

	台湾317青铜安全阀SV-B3DA

	台湾317青铜安全阀SV-B3DL

共 1 条信息首页上一页下一页尾页页次： 1/7 页 8条信息/页

台湾317青铜安全阀SV-B29、S3W-LR

(SV-B29) BRONZE SAFETY RELIEF VALVE (OLD MODEL: S3W-LR)

MODEL: SV-B27 / SVP-B27 WITHOUT LEVER

MODEL: SV-B29 / SVP-B29 WITH LEVER

SV-B27/SV-B29 optional Pressure: 10.5~20 Kgf/cm²

When placing order, please indicate Working Pressure

The Disc can be replaced with PTFE for good effect of anti-leakage. (Model: SVP-B27, SVP-B29)

Working Fluid :	SV-B27/SV-B29/SVP-B29 Non-Corrosive Gas, Air, Steam. SVP-B27 (without lever) Non-Corrosive Gas, Liquid, Air, Steam, Water, Oil.
Working Temp:	-45℃～185℃
Working Pressure:	SV-B27 / SV-B29 : 0.3 ~ 10 Kgf/cm²11 ~ 20 Kgf/cm² SVP-B27 / SVP-B29 (PTFE) 3 ~ 10 Kgf/cm²
Thread End:	BSPT (BS21), NPT (ANSI B2.1)

MATERIAL:
No./ Parts		W/O Lever	SV-B27 (S3W-A)	SVP-B27
No./ Parts		With Lever	SV-B29 (S3W-LR)	SVP-B29
	Type :		METAL TO METAL	PTFE
1	Valve Seat		FORGE BRASS	FORGE BRASS
2	Valve Disc		FORGE BRASS	FORGE BRASS
3	Valve spindle (Stem)		FORGE BRASS	FORGE BRASS
3-1	Valve Seal		-	PTFE
4	Valve Body		BRONZE	BRONZE
5	Spring Shoe		BsBM	BsBM
6	Adjusting Screw		BsBM	BsBM
7	Stop Nut		BsBM	BsBM
8	Cap		FORGE BRASS	FORGE BRASS
9	Lever (Type: B29)		STEEL	STEEL
10	Spring		SWOSC-V	SWOSC-V
11	Screw Washer		BsBM	BsBM
12	Hexagon Nut		BsBM	BsBM
13	Stop Bolt		BsBM	BsBM
14	Pin		BsBF	BsBF

This type of safety valve is characterized by regulating of pressure in valve rising and blowing-out when actuated and is the smallest and lightest valve, and also can be used in non-corrosive gases (air, oxygen, nitrogen, etc.) steam and liquids, such as water and oil. The sizes shown in the chart are subject to change without notice.

Nominal Diameter	Valve Seat Diameter D	Lift l	Effective Area mm²			L1 E	L2 F	Fitting Screw		Closed Type		Lever Type
Nominal Diameter	Valve Seat Diameter D	Lift l	2.22Dl	πD l	0.785D²	L1 E	L2 F	Inlet d1	Outlet d2	A mm	Weight	A1 mm	Weight
12	12	0.52	13.32	18.84	113.0	29	50	PT 1/2	PF 1/2	138	0.52	161	0.59
19	19	0.76	32.05	45.36	283.3	36	58	PT 3/4	PF 3/4	150	0.66	172	0.74
25	25	1.00	55.50	78.53	490.6	40	70	PT 1	PF 1	180	1.09	202	1.19
32	32	1.28	90.93	128.67	803.8	50	82	PT 1.1/4	PF 1.1/4	206	1.90	222	1.94
38	38	1.52	128.22	181.45	1133.5	54	93	PT 1.1/2	PF 1.1/2	231	2.35	246	2.39
50	50	2.00	222.00	314.15	1962.5	67	102	PT 2	PF 2	265	3.85	282	4.11