Emerson Liebert® GXT3-10000RT230-中国工控网(chinagkong.com)-中国工控行业门户网站

首页 > 供应 > 电源 >

Emerson Liebert® GXT3-10000RT230

来自：北京安泰利业电子有限公司

18900人民币

发布时间：2019-2-26 关注次数：115

产品参数

商品详情

Emerson Liebert® GXT3-10000RT230

Additional Information

Design Requirements :
Model Rating	9000W/10000VA
Output Load Capacity	220 / 230 / 240
Internal Battery	Valve-regulated, non-spillable, lead acid cells.
Battery Reserve Time	Minimum 3 minutes with an ambient temperature of 25°C (77°F).
Battery Recharge	The UPS shall contain a battery charger designed to prolong battery life. Recharge time for UPS internal batteries shall be 3 hours maximum to 90% capacity after a complete discharge into full load.
Frequency	The UPS shall auto-sense mains frequency of 50Hz or 60Hz when first powered up and shall use this frequency as the default output frequency.
Mains Power Factor	>0.99 lagging at rated load.
Mains Output, UPS Inverters :
Voltage Configuration	50Hz, single-phase, 2-wire-plus-ground.
Voltage Regulation	L-N: ±3% steady state.
Frequency Regulation	±3.5Hz synchronized to mains.
Frequency Slew Rate	1.0Hz per second maximum
Load Power Factor Range	0.65 lagging to 1.0 (unity)
Voltage Distortion	Sinusoidal Waveform; ≤3% total harmonic distortion (THD) into a 100% linear load; ≤5% THD into a 100% non-linear load with a crest factor ratio of 3:1.
Voltage Transient Response	±7% on-line or Battery mode for 0-100-0 % loading of the UPS, ±4% on-line or Battery mode for 20-100-20 % loading of the UPS.
Transient Recovery Time	To nominal voltage within 166 milliseconds.
Efficiency	92% AC-AC
Accessories :
RMKIT 18 32	Rackmount Kit for GXT3 Communications for Power Monitoring, Control and Preventive Maintenance: Liebert GXT4 offers a variety of communication options, providing flexible monitoring, control capabilities and preventive maintenance. These include: Optional SNMP/Webcard for UPS monitoring and control Optional Modbus and Relay cards Liebert MultiLink automated system shutdown software Liebert Nform? monitoring system LIFE? compatibility for UPS preventive maintenance and remote diagnostic service Ideally Suited for Mission-Critical Applications: LAN and WAN servers Network equipment IP telephony deployments Office telecommunication systems Test and diagnostic equipment Finance applications