首页
0/100
台湾JTC-4054预热塞钻孔拆除器
来自：上海迈哲电子科技有限公司
1人民币
发布时间：2012-11-6
关注次数：234
产品参数
商品详情
台湾JTC-4054
台湾JTC-4054预热塞钻孔拆除器
‧Choose the NO. 4 socket, install it onto the glow plug,
use a hammer to fix the socket with glow plug head then
try to remove the glow plug with 3/8 " DR. spanner.
‧This tool is especially for the situation when removing
the glow plug, but there is only head is removed then
please use the other accessories to remove the rest glow
plug hole and replace a new one
‧Insert NO.6 tube into the glow plug hole, then insert a
No.10 φ3.5 drill into NO.6 tube then drill a hole with air tool.
‧Separate the NO.9 device and only choose the cone center
tool and install it into the glow hole. Choose suitable drill
from NO.2 (7x 5.5 or 9x 5.5 or 8x 5.5), inert the drill into
NO.8 drill installer. It is important to sue NO.5 (3mm alley key)
to lock the screw on drill installer.
Then install it into cone center tool, and connect with air tool
to drill and also remove the hex nut from glow plug.
台湾JTC-4054预热塞钻孔拆除器
‧Choose the NO. 4 socket, install it onto the glow plug,
use a hammer to fix the socket with glow plug head then
try to remove the glow plug with 3/8 " DR. spanner.
‧This tool is especially for the situation when removing
the glow plug, but there is only head is removed then
please use the other accessories to remove the rest glow
plug hole and replace a new one
‧Insert NO.6 tube into the glow plug hole, then insert a
No.10 φ3.5 drill into NO.6 tube then drill a hole with air tool.
‧Separate the NO.9 device and only choose the cone center
tool and install it into the glow hole. Choose suitable drill
from NO.2 (7x 5.5 or 9x 5.5 or 8x 5.5), inert the drill into
NO.8 drill installer. It is important to sue NO.5 (3mm alley key)
to lock the screw on drill installer.
Then install it into cone center tool, and connect with air tool
to drill and also remove the hex nut from glow plug.
展开
询盘信息
必填＊
-
姓名：
-
联系手机：
-
需求量：
选填
-
固话电话：
-
联系邮箱：
-
所在单位：
所咨询的内容：
我想了解：《台湾JTC-4054预热塞钻孔拆除器》的详细信息.请商家尽快与我联系。
完成
咨询内容
完成
完成
