行车扁电缆应用安装范围
      行车扁电缆采用特殊结构，可作为动力及控制电缆安装在轨道，起重机，行车、物流输送等场合。
Applications:
As connecting and control cable for cranes and conveyors,it is suitable for the places of railway stations,crane and other related situations.
It is suitable as a control and connection cable for canes and conveyors on building sites,container goods railway stations and dockyards where operating conditions are rough.
行车扁电缆特性
采用新型耐油柔性专用外护套，可在-15℃低温下仍保持柔软，阻燃

properties:
Conductor:superfine copper strands acc.to VDE 0295,class 5
Insulation:mixed pvc,resistant to lil,flane resistance and self-extinguishing
Colour:acc.to 227 IEC (brown,blue,black,green/yellow) 5 cores or more     with black number with white digital coding
Sheath:Butadiene-acrylonitrile rubber;resistant to lil,flame retardant     and self-extinguishing;
Colour:black(RAS9005)or Grey(RAL7001).
Standard:acc.to VDE 0482,part 265-2-1 resp.EN50265-2-1 and IEC 60332-1.
行车扁电缆结构
行车扁电缆导体：多股精绞无氧铜丝，符合VDE0295CLASS 5 标准
行车扁电缆绝缘：特殊耐油、阻燃、混合PVC绝缘
行车扁电缆颜色：颜色表示，符合227IEC（棕、蓝、黑、黄绿）
     黑色数字白色号码编号，符合EM50214标准（如含黄绿接地线请说明）
护套：耐油、阻燃、弹性pvc专用护套或灰色（RAL7001)、黑色（RAL9005）。在室外使用时必须事先说明。
Technical data:
Rated voltage:≤1.5mm 300/500 V  >1.5mm 450/750 V
Test voltage:≤1.5mm 2500 V  >1.5mm 300 V
Minimum bending radius:0.3m<l< 0.6m;
Burning vertically test:GB/T1 8380.1-2001,IEC60332-1:1993 test
Passedstandard:GB5023.6,IEC60277-6,EN50214.
Used under the normal conditions.the temperature of conductor is lower than 70℃
Temperatur rang:-15℃ to +70℃
Cables are recommender for Installations where the suspended length doesn, t exceed 80m:and the speed of travel does not exceed 4m/s.
If it more than this,with steel.

行车扁电缆如起重机的使用情况如下时：
起重电缆是一字型排列时
1，自由使用长度大于35M;
2,运行速度大于1.6M/s
应考虑在电缆中增加承力元件，承力元件一般为镀锌钢丝绳或纤维绳如芳纶纱等
起重电缆是梅花排列时
1，自由悬挂长度大于80M;
2,运行速度为4.0m/s-10.0m/s;
应考虑在电缆中增加承力元件，承力元件一般为镀锌软钢丝绳。

行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆行车扁电缆