爱发科油旋片式真空泵GLD-201B原装进口-中国工控网(chinagkong.com)-中国工控行业门户网站

首页 > 供应 > 电动机 >

爱发科油旋片式真空泵GLD-201B原装进口

来自：上海冬海机电科技有限公司

12000人民币

发布时间：2017-6-25 关注次数：283

产品参数

商品详情

TS}]FMJ1OQ4CMU~EARLL0@P
J`Z9EC0[7@ZDV$WWM%%Z0~H

Features

GLD series features high performance, low vibration and noise and several functions such as gas ballast valve, oil-back-flow prevention mechanism, and large sized oil level gauge. This series equips multi-voltage motor and correspondent to international standard.

Applications

•	Chemical, science experiment, Analyzer and Laser system.
•	Backing pumps for SEM.
•	Semiconductor equipments, sputtering equipments, vacuum evaporation equipments.
•	Vacuum dryer, freeze dryer.

Specifications

top of page

	Unit	50Hz	60Hz
Actual Pumping Speed	L/min	200	240
Ultimate pressure	Pa	0.67 (G.V. Closed) 6.7 (G.V. Open)
Motor		Single phase, 100-120V/200-240V, 550W, 4 poles, Multiple-range motor, Capacitor start & run
Full load current	A	8.2 (100-120V) 4.1 (200-240V)	7.9 (100-120V) 3.9 (200-240V)
Oil capacity	mL	1,100
Recommended oil		SMR-100
Weight	kg	29
Inlet port diameter	mm	KF-25
Ambient temperature	°C	7 – 40
Overall dimensions	mm	170(W) x 515.5(L) x 249.5(H)

*Ultimate pressure is measured by Pirani gauge.

Caution

top of page

1.	Oil is deteriorated with operating, and becomes the factor of performance shortage. A decrease and the dirt of oil are confirmed, and please regularly add and replace it.
2.	A backflow preventer is incorporated into the pump to prevent the oil from flowing back while the pump is stopped. Please make a suction side into atmospheric pressure when the pump is stopped for a long time.
3.	If operation is performed at high pressure, oil mist is generated at the exhaust side.
4.	It is not suitable for the pump if operation is performed continuously at a high evacuation pressure of 10kPa or more.
5.	There is a risk of explosion. Never block the outlet or operate the pump with equipment mounted at the outlet side that blocks the passage of gas. Otherwise, the internal pump pressure increases causing the pump to explode, the oil level gauge to protrude or the motor to be overloaded.
6.	This motor houses an automatic returning thermal protector, which may be activated in case of trouble. The motor will restart automatically when the temperature goes down. If the thermal protector is activated, switch off the power immediately for safety reason.