梯形背贴式橡胶止水带

背贴式橡胶止水带以天然橡胶与各种合成橡胶为主要原料，掺加各种助剂及填充料，经塑炼、混炼、压制成型，其品种规格较多，有桥型、山型、P型、U型、Z型、乙型、T型、H型、E型、Q型等。背贴式橡胶止水带根据使用情况又可分类为中埋式橡胶止水带和背贴式橡胶止水带。该止水材料具有良好的弹性，耐磨性、耐老化性和抗撕裂性能，适应变形能力强、防水性能好，温度使用范围为-45℃-＋60℃。当温度超过70℃，以及橡胶止水带受强烈的氧化作用或受油类等有机溶剂侵蚀时，均不得使用橡胶止水带。
Back stick type rubber waterstop with natural rubber and various synthetic rubber as the main raw material, and the filling material mixed with various additives, through plasticizing, mixing, molding, the more varieties of different specifications, bridge, mountain type, P type, U type, Z type, T type, type, type H, E type Q type. According to the usage, the back - up rubber waterproof belt can be classified as the embedded rubber water stop belt and the back - mounted rubber water stop belt. The sealing material has good elasticity, abrasion resistance, aging resistance and tear resistance to deformation ability, good waterproof performance, temperature range of -45 DEG C -60 C. Rubber seals shall not be used when the temperature is above 70 degrees, and the rubber sealing strips are strongly oxidized or eroded by organic solvents such as oils.

背贴式橡胶止水带作用与原理
Function and principle of back mounted rubber water stop belt
背贴式橡胶止水带是利用橡胶的高弹性，在各种荷载下产生弹性变形，从而起到坚固密封，有效地防止建筑构造的漏水，渗水并起到减震缓冲作用。在许多工程建筑设计中，土建、水土结构之间都有一定的伸缩要求，并存在防水防震等问题，因此采用和安装橡胶止水带是有效地解决以上种种问题的手段。本产品主要用于混凝土现浇时设在施工缝及变形缝内，与混凝土结构成为一体的基础工程、地下设施、隧道涵洞、输水渡槽、挡水坝等，确保工程建设的使用寿命。
Back mounted rubber water stop is a kind of high elasticity made of rubber, which produces elastic deformation under various loads, so as to achieve strong sealing, effectively prevent leakage of building structure, seepage and play a role of shock absorption and buffering. In many engineering architectural design, there are certain requirements between the telescopic construction, soil structure, and there are problems such as waterproof and shockproof, so using and installing the rubber sealing strip is effective means to solve these problems. This product is mainly used in concrete cast-in-place construction joints and deformation joints, and foundation engineering, concrete structure has become one of the underground facilities, tunnel, culvert aqueduct, dam etc., to ensure the construction of service life.
背贴式橡胶止水带技术标准
Technical standard for back bonded rubber water stop
我公司生产的背贴式橡胶止水带是采用国家标准GB18173.2-2000《高分子防水材料止水带》组织生产的。 因此我们可以按用户要求生产各种形状、尺寸的橡胶止水带，另外还为不同工程、不同部位的需要备有十字型，丁字型、斜度型和内外转角型产品，可适用于任何设计要求。在止水带产品在运输时，应避免阳光直射，勿与热源、油类及有害溶剂接触。成品应取直平放，勿加重压。存放场所最好保持-10℃－+30℃，相对湿度在40%－80%。背贴式橡胶止水带适用范围：应用于地下构筑物、水坝、贮水池、游泳池、屋面以及其他建筑物质和构筑物的变形缝防水。
Our company produced the back type rubber waterproof belt is the use of national standard GB18173.2-2000 "polymer waterproof material water stop" organization production. Therefore, we can according to the production of various shapes and sizes of the rubber sealing belt to user requirements, but also for different parts of engineering, preparation of a cross, T-shaped, slope type and internal and external rotation type products, can be applied to any design requirements. When the water stop belt is in transportation, it should avoid direct sunlight, and do not contact with heat source, oil and harmful solvents. The finished product should be straight and flat, without heavy pressure. The best places to keep -10 +30 stored C C, relative humidity in 40%80%. The application scope of back bonded rubber water stop is applied to the deformation joint waterproof of underground structures, dams, storage tanks, swimming pools, roofs and other building materials and structures.