丁基钢板腻子止水带是采用优质高分子材料与镀锌板复合而成的橡胶止水带产品。其中橡胶腻子的主体材料具有耐老化性能优良，特强的自粘性；夏季高温不流淌。冬季低温不发脆；并具有优异的耐水、耐酸碱和耐老化性能；使用寿命长，产品本身无毒，环境良好。为了承受一定的弯曲和压力。中间来有0.4或0.6mm的钢板。该止水带对建筑缝之间提供可靠的防水、防渗功能。
The butyl steel plate putty water stop belt is a rubber water stop belt, which is made of high quality polymer material and galvanized sheet. The main material of rubber putty has good aging resistance and strong self viscosity, and it does not flow at high temperature in summer. In winter, the low temperature is not brittle; it has excellent water resistance, acid and alkali resistance and aging resistance; long life, the product itself is non-toxic, and the environment is good. To bear a certain amount of bending and pressure. There are 0.4 or 0.6mm steel plates in the middle. The water stop belt provides reliable waterproof and anti-seepage function between construction joints.
钢板橡胶止水带是将镀锌钢板插入硫化好的橡胶中，橡胶采用国产一级特种橡胶与促进剂量、防老剂等，经混炼、挤压后与镀锌钢板粘合而成的一种新型接缝止水产品。
Steel plate rubber sealing strip is inserted into the good will of galvanized steel plate vulcanized rubber, rubber made of a special rubber antioxidant and promoting dose, etc., a new type of sealing products through mixing, extrusion and galvanized steel plate bonding.
这种止水带可以有效地防止各种荷载下产生的弹性、变形及施工缝的温差变化，起到坚固密封。并且能有效的防止施工缝漏水，渗水，并对各种作用力起到缓冲作用。
This kind of water stop belt can effectively prevent the variation of temperature difference between the elastic, deformation and construction joints under various loads, and it can be a strong seal. And it can effectively prevent water leakage and seepage of construction joints, and play a buffer effect on various forces.
本产品具有耐老化性能优良，特强的自粘性；夏季高温不流淌。冬季低温不发脆；并具有优异的耐水、耐酸碱和耐老化性能；使用寿命长，产品本身无毒，环境良好。为了承受一定的弯曲和压力。中间来有0.4或0.6mm的钢板
This product has good aging resistance, strong self viscosity, high temperature not flowing in summer. In winter, the low temperature is not brittle; it has excellent water resistance, acid and alkali resistance and aging resistance; long life, the product itself is non-toxic, and the environment is good. To bear a certain amount of bending and pressure. A steel plate with 0.4 or 0.6mm in the middle
。本产品可以对建筑缝之间提供可靠的防水、防渗功能。当使用普通橡胶止水带时，如果建筑结构变形大时，橡胶止水带则随着结构的沉降，其横向截面拉长，变薄，超过其疲劳变形极限时，很可能会形成新的渗漏缝隙。
. This product can provide reliable waterproof and anti-seepage function between construction joints. When the ordinary rubber water stop is used, if the construction deformation is large, the rubber sealing belt will probably form new leakage gaps when the transverse section is elongated and thinned and the fatigue deformation limit exceeds the fatigue limit.
我们可以根据用户要求生产各种非标型号的产品，并满足各种工程上的实际需要。适用于许多大型建筑领域，尤其是在水压高和结构变形量较大时，其止水效果更为明显。
We can produce various non - standard models according to the user's requirements and meet the practical needs of various projects. It is suitable for many large construction fields, especially when the water pressure is high and the deformation of the structure is large, and the effect of water stop is more obvious.
我公司可以生产各种规格的钢板腻子止水带产品，并可根据用户要求，生产各种非标型号的产品，满足工程上的实际需要。1、主要应用范围：隧道、地铁、堤坝、涵洞、水利水电工程中施工缝、高层建筑地下室、地下停车场等主要工程施工缝。
Our company can produce all kinds of steel plate, putty and water stop products, and can produce all kinds of non-standard products according to users' requirements, so as to meet the actual needs of engineering. 1, the main applications: tunnel, subway, embankment, culvert, water conservancy and hydropower engineering construction joints, high-rise building basement, underground parking lots and other major construction joints.
钢板腻子止水带的施工方法及注意事项
Construction method and precautions of steel plate putty water stop belt
A、将钢板腻子止水带膨胀腻子连接处搭接100mm，用手压紧排除空气靠其自身粘接牢固，并加固轧丝后重新贴上保护膜。
A, connect the steel plate and putty water stop and the expansion putty joint to 100mm. Press the air by hand to remove the air and stick firmly to it, and reinforce the wire to re attach the protective film.
B、将钢板膨胀腻子止水带安放在墙体的中间位置，用铁丝固定在钢筋上，止水带略高于混凝土介面。
B, put the steel plate expansion putty water stop in the middle of the wall, fixed on the steel wire with iron wire, the water stop is slightly higher than the concrete interface.
C、再次浇注前，将橡胶止水带下端的保护膜取掉，混凝土浇注至钢板膨胀腻子宽度的1／21／3处，在二次浇注前将上端保护膜取掉，再进行浇注。而采用钢板橡胶止水带时，两边的钢板与周围的混凝土结构的粘接极强，同是钢板与橡胶粘接极其牢固。当结构变形时，只存在橡胶部分拉长，变薄，而钢板与混凝土、钢板与橡胶之间不会产生新的渗漏缝隙，因此，用钢板橡胶止水带即增强了结构变形时的防渗性能，同时对整个工程的防渗止水起到了重要的质量保证。
C, before pouring again, remove the protective film at the lower end of the rubber sealing belt, and pour the concrete into the 1 / 21 / 3 width of the expansion putty of the steel plate, then remove the upper protective film before the two time of pouring, and then pour. When the steel plate rubber belt is used, the steel plate on both sides is very strong with the surrounding concrete structure, and the steel plate and rubber are firmly bonded. When the deformation of the structure, only the rubber part elongate, thin, but not between steel and concrete, steel plate and rubber leakage gap, new so that enhances the anti-seepage performance of structure deformation when using steel plate rubber waterstop, and seepage of the whole project played an important quality assurance.