INCONEL® 82 焊丝AWS A5.14，ERNiCr-3随货质保书

INCONEL 82 焊丝用于熔化极气体保护焊、钨极惰性气体保护焊和埋弧焊等方法焊接INCONEL 600\601\690合金，INCOLOY 800\800HT\330合金，还可用于钢材的表面堆焊。用NI-ROD 99焊丝进行埋弧焊时应使用INCOFLUX 4埋弧焊剂。当用INCOFLUX 6埋弧焊剂进行埋弧焊时，焊道层数最多为三层。

用INCONEL82 焊丝形成的焊缝金属具有较高的强度和较好的耐蚀性，在高温下具有较好的抗氧化能力和较高的蠕变破裂强度。

另外，INCONEL82 焊丝还具有广泛的应用范围,可以用于异种材料的焊接，如INCONEL系列合金、INCOLOY系列合金的焊接，或INCOLOY 330合金与镍、MONEL系列合金和不锈钢以及碳钢的焊接，它也可用于焊接不锈钢与镍基合金或碳钢。

   焊丝可以以线卷或直线状供货，并有几种不同直径可供选择，如下表所示:

产品    

供货

状态

直线长度--915 mm(36”)或1000 mm(39”)

INCONEL ® 82 wire

INCONEL 82 wire is used to weld INCONEL 600\601\690 alloy, INCOLOY 800\800HT\330 alloy, and can also be used for surfacing of steel for melting gas welding, tungsten inert gas shielded welding and submerged arc welding. INCOFLUX 4 submerged arc welding agent should be used for the submerged arc welding with NI-ROD 99 welding wire. When the submerged arc welding of INCOFLUX 6 is used, the maximum number of weld layer is up to three layers.

The weld metal formed with INCONEL82 electrode has a high strength and good corrosion resistance, and has good antioxidant capacity and high creep rupture strength at high temperature.

In addition, INCONEL82 wire has wide application range, can be used for welding of dissimilar materials, such as INCONEL alloy series, series of INCOLOY alloy welding, or INCOLOY 330 alloy with nickel, MONEL alloy and stainless steel and carbon steel welding, it also can be used for welding stainless steel and nickel base alloy or carbon steel.

AWS A5.14, ernicr-3 VdTuV 2117.00; 2118.00,

ASME specifications Ⅱ, SFA - 5.14, ERNiCr - 3 2110-00; 2111.00

MIL - E - 21562 DIN 1736 SG - NiCr20Nb

Types MIL - RN82, MIL - EN82 Werkstoff Nr. 2.4806

MIL - RN82H, MIL - EN82H UNS N06082

ASME Ⅸ, F - No. F43 ISO SNi6082

BS 2901 (NA35) Europe NiCr20Mn3Nb

Nia -- -- -- -- -- -- -- -- -- -- 67.0 min Si -- -- -- -- -- -- -- -- -- -- - 0.50 Max

Chemical C -- -- -- -- -- -- -- -- -- -- 0.10 Max Cr -- -- -- -- -- -- -- -- -- - 18.0-22.0

Composition of Mn -- -- -- -- -- -- -- -- -- - 2.5-3.5 Ti -- -- -- -- -- -- -- -- -- -- -- -- -- 0.75 Max

Fe -- -- -- -- -- -- -- -- -- -- 3.0 Max Nbb -- -- -- -- -- -- -- -- -- -- -- -- -- - 2.0-3.0

S -- -- -- -- -- -- -- -- 0.015 Max P -- -- -- -- -- -- -- -- -- -- - 0.030 Max

Cu -- -- -- -- -- -- -- -- -- 0.50 Max other -- -- -- -- -- -- -- -- -- 0.50 Max

A add Co, the maximum amount of Co is 0.12 when required

The maximum content of Ta is 0.30 when the special request is made

Minimum tensile strength, psi 80,000

Mechanical 552 MPa

Performance extension rate (4d) % 30

The wire can be supplied in a reel or straight line, with several different diameters to choose from, as shown in the following table:

products

Mm 0.8 0.9 1.0 1.14 1.2 2.4 3.2

In 0.030 0.035 0.040 0.045 0.035 0.062 0.093 0.125

supply

state

Linear length -915 mm(36 ") or 1000 mm (39)