产品介绍： 

·该锯适用于危险的工作环境，可在较高温的环境下作业，无火花，在潮湿的环境中无漏电危险，是一款性能可靠、安全型及效率极高的理想风动工具之一。广泛用于采矿、石化、建筑等行业。 

·利用井下压风管道系统作为动力源。重量轻，易携带；结构科学，便于作业。 

·可快速切割管道、电缆、角钢、结构钢、U型钢、链条、锚杆、锚索等。 

·锢金属钢合金超级锯条，耐高温、耐摩擦、使用寿命长。非常适用于锯割不锈钢、镍基合金、铁、铜、铝、玻璃、塑料、木材等。技术参数： 

联系人金经理电话13934240041

使用方法：

1、了解所需切割的材料，如有必要可以通过降低空气压力来降低锯片的转动速度。 

2、确保牢固固定了所需切割的材料，防止其移动。 

3、气动空气马达时，用手指按压阀杆，然后开始切割。 

4、用锯的重量来控制切割压力。对于较软的材料来说，这样的重量已经足够。过多的压力会降低锯片的速度。对于较硬的材料，可以通过加压的方式来降低锯片的转动速度。切割是保持锯笔直。锯片的任何扭曲或歪斜都可能降低其使用寿命。（注意：避开切割后可能掉落的碎片。切割即将完成时，切勿使锯碰到您的身体、工件或附近的其它人员。） 

5、关闭空气马达时，释放阀杆。 

6、下次切割开始前，锯片必须保持运动状态。气动锯时，锯片不能接触任何表面。 

7、断开空气软管时，关闭空气软管阀。断开前，先打开空气阀给软管减压。 

8、更换锯片前，务必断开空气软管，并推动阀杆以释放掉马达内的压力。 

9、顺时针转动调整手柄以便释放锯片导杆上的张力。然后释放侧面板的锁以便打开侧面板。然后从驱动轮上取下锯片并将其从锯带导杆上松开。

山东枣庄FDJ-120方刚切割锯报价

联系人金经理电话13934240041

河南平顶山市煤矿井下气动切割锯气动煤矿防爆U型钢切割锯宁夏煤矿井下锚索切割机矿用煤炭切割机钢管U型钢切割锯辽宁抚顺市煤矿井下气动切割锯矿用煤炭切割机钢管U型钢切割锯江苏南京矿用工字钢切割锯钢管角钢切割锯山西长治市气动铝合金钢材切割锯矿用风动钢管U型钢切割气动风动切割锯四川成都煤矿井下气动切割锯气动带锯手持式无火花切割锯河南煤矿井下气动切割锯手持式无火花切割锯河南气动切割锯配件H钢工字钢快速切割锯方管切割锯内蒙古东胜市气动铝合金钢材切割锯手提式气动工字钢无火花矿用切割锯河南煤矿井下锚索切割机U型钢工字钢风动切割锯新疆哈密市矿用工字钢切割锯FDJ-220进口风动切割锯工字钢切割气动锯贵州贵阳矿用U型钢切割锯小型轻轨切割锯江西无火花切割锯厂家矿用锚索锚杆气动带锯内蒙陕西气动切割锯配件矿用气动切割锯切铁锯参数山西周边煤矿井下气动切割锯手持式无火花切割锯新疆乌鲁木齐气动切割锯配件矿用锚杆锚索切割锯福建宁夏气动铝合金钢材切割锯手提式气动切割锯矿用大功率工字钢切割锯山东济南无火花切割锯厂家FDJ-120工字钢气动风动无火花切割锯供应河南平顶山市无火花切割锯厂家高瓦斯防爆切割锯黑龙江七台河气动铝合金钢材切割锯阳泉矿用气动切割锯厂家U型钢切割锯吉林辽源市煤矿井下切割锯锯条太原切割锯生产手持式无火花矿用切割锯新疆矿用工字钢切割锯FDJ-120矿用大功率工字钢切割锯四川眉山矿用U型钢切割锯新型石油管道切割锯

ommodity introduction:
The FDJ-120 type pneumatic cutting saw is suitable for the risk working environment. It can operate in a high temperature environment, no sparks, and no leakage risk in humid environment. It is a reliable, safe and highly efficient aspiration pneumatic thing. It is widely used in mining, petrochemical, construction and other professions.
Use the downhole air pressure pipe system as a power source. The weight is light and easy to be carried; it is scientific and easy to work. Si Li Zhen FDJ-120/ mine explosion-proof cutting saw
Open pipe, cable, angle steel, structural steel, U type steel, chain, bolt, anchor cable and so on.
- Han metal steel alloy saw blade, high temperature resistance, long life, the use of conflict. It is suitable for sawing stainless steel, nickel base alloy, iron, copper, aluminum, glass, plastic, wood and so on.
Technical parameters:
Type of type power consumption cut width cut width (diameter) speed weight of saw blade
FDJ-120 0.5KW 0.6m3/min three saws:
0 - 30mm
30 - 50mm
50 - 120mm 120mm 60m/min 6kg
FDJ-180 1.0kw 1.2m3/min 180mm 90m/min 10kg
FDJ-230 1.5kw 1.5m3/min 230mm 120m/min 16KG
Primary incision range:
The FDJ-120/220/230 pneumatic cut saw used the downhole pressure pipe system as a power source.
Light weight, easy to take; construction of science, easy to work.
The pipeline, cable, angle steel, structural steel, U type steel, chain, bolt, anchor cable and so on can be cut off quickly.
Super - Han metal steel alloy saw blade, high temperature resistance, long life, the use of conflict.
Widely used in natural gas, coal mine, petrochemical, construction and other professions.
Pneumatic pneumatic cut saw application method:
1. Knowing the material that needs to be cut, it is necessary to reduce the speed of the saw blade by reducing the pressure of the air. Longting District FDJ-120 mine pneumatic cutting saw
2. It is true that the health-care stout has fixed the required cut materials to prevent it from moving.
3. When pneumatic air motor, press the stem with the finger, and then cut it initially.
4, the cutting pressure is controlled by the weight of the saw. This weight is now satisfactory for softer materials. Too much pressure can reduce the speed of the saw blade. For harder materials, the speed of the saw blade can be reduced by pressure.  The incision is to keep the saws straight. Saw any distortion or skew can reduce the use of life. (notice: avoid debris that can fall after a cut. When the cut is about to end, do not make the saw touch your body, the workpiece, or the other people in the neighborhood.
5. When the air motor is closed, the stem is released.
6. Before the next incision, it is necessary to adhere to the movement of the saw blade. The saw blade can't contact any surface when a pneumatic saw. Yanshi city FDJ-120/ mine explosion-proof cutting saw
7. When the air hose is disconnected, the air hose valve is closed. Before disconnecting, open the air valve and decompress the hose.
8. Before replacing the saw, it is necessary to disconnect the air hose and push the stem to release the pressure of Madane.
9, adjust the handle clockwise to release the tension on the sawing guide rod. Then release the lock of the side panel so as to open the side panel. Then remove the blade from the drive wheel and release it from the sawing guide rod.
Note:
All power things may be very risky. Please follow the following safety procedures in order to maintain yourself.
1, wear goggles, gloves, safety boots and protective clothing.
2, time to adhere to the feet of stability, balance. Xuchang city mine / small portable pneumatic cutting saw
3, medical treatment, alcohol or drugs do not operate the things.
4. Before placing the machine, turn off the machine first (closed valve).
5. After the machine stops working, the supply of gas should be cut off immediately to prevent the machine from launching under the unconsciousness.
6. Do not stand on the ladder or operate on the scaffolding. Please stay away from the operation area.
7, operation to launch a clamp, should first remove the hose. Turn off the main valve. To release the compressed gas, then turned away from the valve.
8, hold the machine with both hands. Keep the rest of your hands and body away from the open area.
9, the motor must be turned off before transporting the machine and the gas source is cut off.
10, pay attention to the debris that may fall.