INCONEL 601^® 焊丝

INCONEL 601 焊丝是用钨极气体保护焊（GTAW）焊接INCONEL 601合金的首选焊丝。应用INCONEL 601 焊丝的GTAW焊接方法是在超过1150℃的高温环境下或在温度较低但却暴露在硫化氢或二氧化硫环境下焊接INCONEL 601合金的唯一推荐方法。同时，这种焊丝形成的焊缝金属具有与母材相等的抗腐蚀与抗氧化性能。

焊丝可以以线卷或直线状供货，并有几种不同直径以供选择，如下表所示：

产品

供货

状态

直线长度--915 mm(36”)或1000 mm(39”)

INCONEL 601 welding wire is the preferred electrode for welding INCONEL 601 alloy with tungsten gas welding (GTAW). INCONEL 601 wire GTAW welding method is in more than 1150 ℃ high temperature conditions or in low temperature but exposed to hydrogen sulfide or sulfur dioxide welding INCONEL 601 alloy the only recommended way. At the same time, the weld metal formed by the wire has the same anti-corrosion and antioxidant properties as the mother material.

AWS A5.14 ERNiCrFe - 11 Werkstoff Nr. 2.4626

ASME Ⅱ, SFA - 5.14, UNS N06601 ERNiCrFe - 11

ASME specifications Ⅸ, F - No. 43 ISO SNi6601

DIN1736 SG - NiCr23Al Europe NiCr23Fe15Al

Ni -- -- -- -- -- -- -- -- -- - 58.0-63.0 Mn -- -- -- -- -- -- -- -- 1.0 Max

Chemical Cr -- -- -- -- -- -- -- -- -- 21.0 25.0 S -- -- -- -- -- -- -- -- -- -- 0.015 Max

Ingredients Fe -- -- -- -- -- -- -- -- -- remaining Si -- -- -- -- -- -- -- -- -- -- 0.50 Max

(1) -- -1.0-1.7 Cu------ -1.0max

C ------ -0.10 Max -- -0.50 Max

Add a Co

Typical tensile strength, psi 94,000

Mechanical 648 MPa

Performance elongation, (4d) % 42

The wire can be supplied in a reel or straight line, with several different diameters for selection, as shown in the following table:

products

Mm 0.8 0.9 1.0 1.14 1.2 2.4 3.2

In 0.030 0.035 0.040 0.045 0.035 0.062 0.093 0.125

supply

state

Linear length -915 mm(36 ") or 1000 mm (39)