维克托李建楠现货供应德国kroma浮球液位开关 SS  0.27  1-2/75-2/120-140

秦皇岛专业供应欧美进口产品   原厂正品 价格好   现货供应  联系人 维克托李建楠

 德国kromaSS 0微型开关以及最小尺寸浮法are designed to Monitor液体levels of

相对小的坦克by means of a浮。所有的股份，使液体are made of contact with the

不锈钢。the浮动开关可以用不同的连接元件（AA与AA和21，22

AA 23）和kroma浮球滑管从100毫米至500毫米长（L）。

有磁铁内浮圈为to开关接触提供了芦苇in the滑管。the浮动开关

can be equipped with either one or two floats。因此，每个浮switches the appropriate簧片接触。L1kroma浮球

与L2对应to the充填levels of the各自的开关点，你仔细测量了from the密封边缘

在中等密度kroma浮球1公斤/ dm³。

kroma浮球液位开关 现货   kromakroma现货kroma电话kroma正品kroma开关kroma浮球

SS  0.27  1-2/75-2/120-140

SS  0.21  0- 1/200 2/100 - 300

SS   0.23  1-2/75-3/100-200

SS  0.25 1-2/ 45/-3/100-200

SS   1.23  1-2/45-3-100-500

SS   1.2   1-2/45-3-100

KROMA    PSS 7.020-0K HS

KROMA    PSS 7.010-0K HS

KROMA    Typ PSS 7.022-15K-HS

KROMA    Typ PSS 7.020-0K HS

KROMA    Typ PSS 7.020-0K HS

德国kroma浮球 MHD041B-144-NP1-UN

德国kroma浮球  R911281505

德国kroma浮球  R911325865

德国kroma浮球  R911325865

德国kroma浮球 FWA-DIAX04-SSE-02VRS-MS

德国kroma浮球 FWA-DIAX04-SSE-02VRS-MS

德国kroma浮球 HMV01.1R-W0045-A-07-NNN

德国kroma浮球 MHD041B-144-NP1-UN

德国kroma浮球  MKD071B-061-GG0-KN

德国kroma浮球 R911333190

德国kroma浮球 R9111-90005

德国kroma浮球 CSH01.1C-NN-ENS-MEM-MA1-L2-S-NN-FW R911329795

德国kroma浮球  HDD02.2-W040N-HD32-01-FW

德国kroma SS  1

德国kroma PSS 7

德国kroma PSS 9

德国kroma MWU 3

德国kroma GWS 4

德国kroma MWA 0

德国kroma MWAG 1

德国kroma MWA 2

德国kroma WAG

德国kroma MWAS 2

德国kroma MWAT 2

德国kroma MWA 3

德国kroma MWAS 4

德国kroma MWAT 4,

德国kroma MWA 5

德国kroma MWAG 5

德国kroma MWAT 5

德国kroma  TSA 03

德国kroma  TSA 04

德国kroma  TSA 05

德国kroma  TSA 06

德国kroma  TSA 07

德国kroma  TSA 08

德国kroma  TSA 09

德国kroma  TSA 10

德国kroma  TSA 11

德国kroma  TSA 12

德国kroma  TSA 13

德国kroma  TSA 14

德国kroma  TSA 15

德国kroma  TSA 16

SS 0 Miniature Float Switch Description KROMA SS 0 miniature float switches with minimized dimensions are designed to monitor liquid levels of relatively small tanks by means of a float. All parts which make contact with the liquid are made of stainless steel. The float switch can be furnished with different connecting elements (AA 21, AA 22 and AA 23) and sliding pipes from 100 mm to 500 mm long (L). A magnet inside the ring float serves to switch a reed contact provided in the sliding pipe. The float switch can be equipped with either one or two floats. Thus, each float switches the appropriate reed contact. L1 and L2 correspond to the filling levels of the respective switching points as measured from the seal edge at a medium density of 1 kg/dm³. Special Features - Only one moving part - the float - Very small type of construction, completely made of stainless steel - Rugged design of the connector plug - Vibration- and shockproof - Per switching contact one float - Tested according to German railways’ standard BN411002/EN50155 (approved for use on rail vehicles) Technical Data Type of contact : Break contact, make contact or change-over contact Contact load: 230V AC; 110V DC; 0.5A; 20 W / VA Number of floats: 1 or 2 Minimum distance of floats: 45 mm Sliding pipe: 100 <= L <= 500 mm , ∅ D = 9 mm Connecting elements: Refer to outline drawings. Connection: Refer to circuit diagram included in the installation instructions. Degree of protection: IP 65 Liquid temperature range: -25°C to +70°C Storage temperature range: -55°C to +70°C Operating pressure: <= 6 bar Density: >= 800 kg/m³ Vibratory strength: 5.9 m/s² (5 to 150 Hz) Shock resistance: 50 m/s² Information required with order (typical order) SS 0 . 21 0 - 1/200 2/100 - 300 KROMA “SS 0“ miniature float switch Connecting elements: “21“ = AA21 (other AAs refer to overview) Mounting position “0“ from top (or “1“ from bottom) Type of contact “1/“ = break contact for rising levels “2/“ = make contact for rising levels “3/“ = change-over contact Contact 1: “1/200“ = break contact for rising levels at L1 = “200“mm Contact 2: “2/100“ = make contact for rising levels at L2 = “100“mm Total length L =“300“ mm Subject to technical modifications. Outline Drawings Viton screw-type seal as per DIN 3869 WD G1 M33x2 L2 L Viton screw-type seal as per DIN 3869 WD G1 M33x2 36 29,7 L1 G 1" 16 width A/F 27 70 16 39 AA21 G 1" 14 width A/F 41 50 8 L2 L 36 29,7 L1 AA22 PG11 plug as per DIN 43650 G 1" 14 width A/F 41 8 L2 L 36 29,7 L1 AA23