法国液化空气集团焊条！AP316L-17不锈钢焊条-中国工控网(chinagkong.com)-中国工控行业门户网站

首页 > 供应 > 不锈钢焊条 >

法国液化空气集团焊条！AP316L-17不锈钢焊条

来自：长城特种耐磨焊条厂

面议

发布时间：2018-6-20 关注次数：319

产品参数

商品详情

CARCINOGENIC EFFECTS: Not classified or listed by IARC, NTP, OSHA and ACGIH.
MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
Absorbed through skin. Dermal contact. Eye contact. Inhalation.
Emergency overview
Medical conditions aggravated
by over-exposure
Repeated exposure to the fumes emitted while using this material may produce general deterioration of health.
Section 2. Hazards Identification
Routes of entry
Potential acute health effects
Potential chronic health effects
Hazardous by the following route of exposure: of inhalation.
Hazardous by the following route of exposure: of eye contact (irritant). Inflammation of the eye is characterized by redness,
watering and itching.
Since the product (welding fumes) is a gas and that it is mostly probable that it will be inhaled more than ingested, please consider
first to look at the preventive measures in case of inhalation.
Hazardous by the following route of exposure: of skin contact (corrosive). Skin contact may produce burns.
Eyes
Skin
Inhalation
Ingestion
Physical state and Appearance Solid.
See section 11 for more detailed information on health effects and symptoms.
:
:
:
:
:
:
:
:
:
(*) See Abbreviations (section 16).
ELECTRIC SHOCK can kill.
FUMES AND GASES can be dangerous to your health.
ARC RAYS can injure eyes and burn skin.
CONTAINS MATERIAL WHICH CAUSES DAMAGE TO THE FOLLOWING ORGANS: BLOOD, KIDNEYS, LUNGS,
RESPIRATORY TRACT, CENTRAL NERVOUS SYSTEM.
MAY CAUSE RESPIRATORY TRACT, EYE AND SKIN IRRITATION.
MAY BE HARMFUL IF INHALED.
WARNING!
Avoid contact with skin and clothing. Avoid contact with eyes. Avoid breathing dusts. Keep container closed. Use only with
adequate ventilation. Wash thoroughly after handling.
This product is a manufactured product under the Canadian WHMIS and an Article under the United States Hazard Communication System. Therefore it is
EXEMPTED from the regulatory requirements under WHMIS and HCS. The fumes emitted by this material when in used are nevertheless hazardous under
these same laws and regulations. This MSDS has been written for workers using these electrodes. The information contain in this document, except in
Sections 1, 2, 9 and 10 refers to the material being used in welding operations.
Silicon Powder, Amorphous 7440-21-3 0.1 - 1 UN1346
Manganese 7439-96-5 0.9-1.85 Not applicable.
Section 3. Composition, Information on Ingredients
Name CAS # % by weight UN number
See Section 8 for Exposure Limits. See Section 11 for Toxicological Data.
Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth toCARCINOGENIC EFFECTS: Not classified or listed by IARC, NTP, OSHA and ACGIH.
MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
Absorbed through skin. Dermal contact. Eye contact. Inhalation.
Emergency overview
Medical conditions aggravated
by over-exposure
Repeated exposure to the fumes emitted while using this material may produce general deterioration of health.
Section 2. Hazards Identification
Routes of entry
Potential acute health effects
Potential chronic health effects
Hazardous by the following route of exposure: of inhalation.
Hazardous by the following route of exposure: of eye contact (irritant). Inflammation of the eye is characterized by redness,
watering and itching.
Since the product (welding fumes) is a gas and that it is mostly probable that it will be inhaled more than ingested, please consider
first to look at the preventive measures in case of inhalation.
Hazardous by the following route of exposure: of skin contact (corrosive). Skin contact may produce burns.
Eyes
Skin
Inhalation
Ingestion
Physical state and Appearance Solid.
See section 11 for more detailed information on health effects and symptoms.
:
:
:
:
:
:
:
:
:
(*) See Abbreviations (section 16).
ELECTRIC SHOCK can kill.
FUMES AND GASES can be dangerous to your health.
ARC RAYS can injure eyes and burn skin.
CONTAINS MATERIAL WHICH CAUSES DAMAGE TO THE FOLLOWING ORGANS: BLOOD, KIDNEYS, LUNGS,
RESPIRATORY TRACT, CENTRAL NERVOUS SYSTEM.
MAY CAUSE RESPIRATORY TRACT, EYE AND SKIN IRRITATION.
MAY BE HARMFUL IF INHALED.
WARNING!
Avoid contact with skin and clothing. Avoid contact with eyes. Avoid breathing dusts. Keep container closed. Use only with
adequate ventilation. Wash thoroughly after handling.
This product is a manufactured product under the Canadian WHMIS and an Article under the United States Hazard Communication System. Therefore it is
EXEMPTED from the regulatory requirements under WHMIS and HCS. The fumes emitted by this material when in used are nevertheless hazardous under
these same laws and regulations. This MSDS has been written for workers using these electrodes. The information contain in this document, except in
Sections 1, 2, 9 and 10 refers to the material being used in welding operations.
Silicon Powder, Amorphous 7440-21-3 0.1 - 1 UN1346
Manganese 7439-96-5 0.9-1.85 Not applicable.
Section 3. Composition, Information on Ingredients
Name CAS # % by weight UN number
See Section 8 for Exposure Limits. See Section 11 for Toxicological Data.
Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to

展开