电机电抗器西门子6SL3000-2BE32-1AA0-中国工控网(chinagkong.com)-中国工控行业门户网站

首页 > 供应 > PLC控制系统 >

电机电抗器西门子6SL3000-2BE32-1AA0

来自：上海斌勤电气技术有限公司

432人民币

发布时间：2018-7-12 关注次数：667

产品参数

商品详情

电机电抗器西门子6SL3000-2BE32-1AA0

6SL3000-2BE32-1AA0

SINAMICS/MICROMASTER PX 电机电抗器用于 3AC 380-480V，50/60Hz，210A AC Drive/功率模块/ 电机模块

概述

Output reactor

Output reactors reduce the rate of voltage rise (dv/dt) and the height of the current peaks, and enable longer motor cables to be connected.

Owing to the high rates of voltage rise of the fast-switching IGBTs, the capacitance of long motor cables reverses polarity very quickly with every switching operation in the inverter. As a result, the inverter is loaded with additional current peaks of substantial magnitude.

Output reactors reduce the magnitude of these additional peaks because the cable capacitance reverses polarity more slowly across the reactor inductance, thereby attenuating the amplitudes of the current peaks.

When using output reactors, the following should be observed:

Max. permissible output frequency 150 Hz
Max. permissible pulse frequency 4 kHz
The output reactor must be installed as close as possible to the Power Module

Two output reactors are to be provided to increase the permissible cable lengths.

When connecting the Power Modules to IT networks, the use of an output reactor is recommended to avoid an overcurrent shutdown in the event of a ground fault.

集成

Available optional output reactors

	Frame size
	FSD	FSE	FSF
PM240P‑2 Power Module
Available output reactors
400 V versions	✓	✓	✓
690 V versions	–	–	✓

技术规范

Line voltage 380 ... 480 V 3 AC		Output reactor
		6SE6400-3TC07-5ED0	6SE6400-3TC14-5FD0	6SL3000-2BE32-1AA0	6SL3000-2BE32-6AA0
Rated current	A	90	178 ¹⁾	210	260
Power loss	kW	0.27	0.47	0.49	0.5
Connection to the Power Module		Flat connector for M6 screw	Flat connector for M8 screw	Flat connector for M10 screw	Flat connector for M10 screw
Motor connection		Flat connector for M6 screw	Flat connector for M8 screw	Flat connector for M10 screw	Flat connector for M10 screw
PE connection		M6 screw	M8 screw	M8 screw	M8 screw
Cable length, max. between output reactor and motor
Shielded	m (ft)	200 (656)	200 (656)	300 (984)	300 (984)
Unshielded	m (ft)	300 (984)	300 (984)	450 (1476)	450 (1476)
Dimensions
Width	mm (in)	270 (10.6)	350 (13.8)	300 (11.8)	300 (11.8)
Height	mm (in)	248 (9.76)	321 (12.6)	285 (11.2)	315 (12.4)
Depth	mm (in)	209 (8.23)	288 (11.3)	257 (10.1)	277 (10.9)
Degree of protection		IP20	IP20	IP00	IP00
Weight, approx.	kg (lb)	27 (59.5)	57 (126)	60 (132)	66 (146)
Suitable for PM240P-2 Power Modules	Type	6SL3210-1RE24-5 . L0 6SL3210-1RE26-0 . L0 6SL3210-1RE27-5 . L0	FSE: 6SL3210-1RE28-8 . L0 6SL3210-1RE31-1 . L0 FSF: 6SL3210-1RE31-5 . L0 6SL3210-1RE31-8 . L0	6SL3210-1RE32-1 . L0	6SL3210-1RE32-5 . L0
Frame size		FSD	FSE/FSF	FSF	FSF

¹⁾ On the rating plate of the reactor, the current is specified according to the duty cycle for high overload (HO). This is lower than the current specified according to the duty cycle for low overload (LO) of the Power Module.

Line voltage 500 ... 690 V 3 AC		Output reactor
		6SL3000-2AH31-0AA0	6SL3000-2AH31-5AH0
Rated current	A	100	150
Power loss	kW	0.3	0.34
Connection to the Power Module		Flat connector for M10 screw	Flat connector for M10 screw
Motor connection		Flat connector for M10 screw	Flat connector for M10 screw
PE connection		M6 screw	M6 screw
Cable length, max. between output reactor and motor
Shielded	m (ft)	300 (984)	300 (984)
Unshielded	m (ft)	450 (1476)	450 (1476)
Dimensions
Width	mm (in)	270 (10.6)	270 (10.6)
Height	mm (in)	248 (9.76)	248 (9.76)
Depth	mm (in)	200 (7.87)	200 (7.87)
Degree of protection		IP00	IP00
Weight, approx.	kg (lb)	25 (55.1)	25.8 (56.9)
Suitable for PM240P-2 Power Modules	Type	6SL3210-1RH28-0 . L0 6SL3210-1RH31-0 . L0	6SL3210-1RH31-2 . L0 6SL3210-1RH31-4 . L0
Frame size		FSF	FSF