返回 供应详情
首页 > 供应 > PLC控制系统 >
崇安区 6SL3040-0JA00-0AA0
崇安区 6SL3040-0JA00-0AA0
来自：上海斌勤电气技术有限公司
88人民币
发布时间：2018-7-16 关注次数：99
产品参数
产品参数
品牌 西门子
规格型号 6SL3040-0JA00-0AA0
编号 6SL3040-0JA00-0AA0
计量单位 件
付款方式 款到发货
价格单位 人民币
商品详情

崇安区  6SL3040-0JA00-0AA0

6SL3040-0JA00-0AA0
SINAMICS S110 控制单元 CU305 DP 带 PROFIBUS 接口 不带存储卡

概述

CU305 PN Control Unit

The CU305 Control Unit for the communication and open-loop/closed-loop control functions of a SINAMICS S110 is combined with the PM240‑2 Power Module in blocksize format (usable as of firmware V4.4 SP3) to create a powerful single drive.

设计

The CU305 Control Unit features the following connections and interfaces as standard:

  • Fieldbus interface
    • CU305 PN: 1 PROFINET interface with 2 ports (RJ45 sockets) with PROFIdrive V4 profile
    • CU305 DP: 1 PROFIBUS interface with PROFIdrive V4 profile
  • 1 DRIVE-CLiQ socket, used solely to connect a DRIVE-CLiQ motor or a Sensor Module
  • 1 onboard encoder evaluation for evaluating the following encoder signals
    • Incremental encoder TTL/HTL
    • SSI encoder without incremental signals
  • 1 PE/protective conductor connection
  • 1 connection for the electronics power supply via the 24 V DC power supply connector
  • 1 temperature sensor input (KTY84‑130 or PTC)
  • 3 parameterizable, fail-safe digital inputs (isolated), or alternatively 6 parameterizable digital inputs (isolated)
  • 5 parameterizable digital inputs (isolated)
  • 1 parameterizable, fail-safe digital output (isolated), or alternatively 1 digital output (isolated)
  • 4 parameterizable bidirectional digital inputs/outputs
  • 1 analog input ± 10 V, resolution 12 bit + sign
  • 1 serial RS232 interface
  • 1 slot for the memory card on which the firmware, parameters and licenses can be stored
  • 1 PM-IF interface for communication with the PM240‑2 Power Modules in blocksize format (usable as of firmware V4.4 SP3)
  • 2 test sockets and one reference ground for commissioning support
  • 1 interface to the BOP20 Basic Operator Panel

集成

The CU305 Control Unit controls the PM240 2 Power Module in blocksize format (usable as of firmware V4.4 SP3) via the PM-IF interface.

A BOP20 Basic Operator Panel can also be snapped directly onto the CU305 for diagnostic purposes.

DRIVE-CLiQ motors can be connected to the integrated DRIVE-CLiQ socket as well as Sensor Modules (SMC) to permit the operation of motors without a DRIVE-CLiQ interface.

The status of the CU305 is indicated via multi-color LEDs.

The CU305 can be operated optionally with memory card. The firmware and project data are stored on the memory card pluggable from below, so that the CU305 can be replaced without the support of software tools. This memory card can also be used to perform standard commissioning on multiple drives of identical type. The card is available as an empty memory card or containing the latest drive firmware version. The card also contains the safety license for the Extended Safety Functions. To use these Extended Safety Functions, a memory card containing the safety license must be permanently inserted.

The CU305 and other connected components are commissioned and diagnosed with the STARTER commissioning tool.

Connection example of CU305 Control Unit

技术规范

CU305 PN / CU305 DP Control Units

PROFINET: 6SL3040-0JA01-0AA0

PROFIBUS: 6SL3040-0JA00-0AA0

 

Current requirement

At 24 V DC, max.
without taking account of digital outputs and DRIVE-CLiQ supply

0.8 A for CU305 incl. 350 mA for HTL encoder + 0.5 A for PM240‑2 Power Module

Conductor cross-section, max.

2.5 mm2

Fuse protection, max.

20 A

Digital inputs

in accordance with IEC 61131‑2 Type 1

3 isolated fail-safe inputs

5 isolated digital inputs

  • Voltage

-3 ... +30 V

  • Low level (an open digital input is interpreted as "low")

-3 ... +5 V

  • High level

15 ... 30 V

  • Current consumption at 24 V DC, typ.

6 mA

  • Delay time of digital inputs 1), approx.

 

  • L → H

15 μs

  • H → L

55 μs

  • Delay time of high-speed digital inputs 1), approx. 
    (high-speed digital inputs can be used for position detection)

 

  • L → H

5 μs

  • H → L

5 μs

  • Conductor cross-section, max.

1.5 mm2

Digital outputs

(continuously short-circuit-proof)

1 fail-safe digital output

4 bidirectional digital inputs/digital outputs, not isolated

  • Voltage

24 V DC

  • Load current per digital output 2), max.

100 mA

  • Delay time 1), approx.

150 μs

  • Conductor cross-section, max.

1.5 mm2

Analog input

-10 ... +10 V
Resolution 12 bits + sign

  • Internal resistance

15 kΩ

Encoder evaluation

  • Incremental encoder TTL/HTL
  • SSI encoder without incremental signals
  • Encoder supply

24 V DC/0.35 A or 5 V DC/0.35 A

  • Input current range TTL/HTL

2 ... 10 mA (typ. 5 mA)

  • Encoder frequency, max.

500 kHz

  • SSI baud rate

100 ... 250 kBaud
depending on cable length

  • Resolution absolute position SSI

30 bit

  • Cable length, max.

 

  • TTL encoder

100 m (328 ft)

(only bipolar signals permitted) 3)

  • HTL encoder

100 m (328 ft) for unipolar signals

300 m (984 ft) for bipolar signals 3)

  • SSI encoder

100 m (328 ft)

Power loss

<20 W

PE connection

M5 screw

Dimensions

 

  • Width

73 mm (2.87 in)

  • Height

 

  • CU305 PN

195 mm (7.68 in)

  • CU305 DP

183.2 mm (7.21 in)

  • Depth

 

  • CU305 PN

71 mm (2.80 in)

  • CU305 DP

55 mm (2.17 in)

Weight, approx.

0.95 kg (2.09 lb)

Certificate of suitability

cULus

崇安区  6SL3040-0JA00-0AA0


展开
上海斌勤电气技术有限公司
VIP会员
进入店铺 店铺留言
袁佐俊(经理) 电话咨询 在线询盘
询盘信息
必填＊
  • 姓名：
  • 联系手机：
  • 需求量：
选填
  • 固话电话：
  • 联系邮箱：
  • 所在单位：
所咨询的内容：

我想了解：《崇安区 6SL3040-0JA00-0AA0》的详细信息.请商家尽快与我联系。

完成
咨询内容
完成
0/100
完成
返回顶部