首页 > 供应 > PLC控制系统 >

S120控制单元6SL3040-0JA00-0AA0

来自：上海斌勤电气技术有限公司

面议

发布时间：2018-9-18 关注次数：876

产品参数

商品详情

S120控制单元6SL3040-0JA00-0AA0

上海斌勤电气技术有限公司专业从事西门子这个品牌已经有10年。
在松江工业园区有一定的名声
不要问我有没有西门子常规的都现货支持上门提货

有需要的新老顾客欢迎上门提货谈生意（老顾客注意公司地址更改）
上海斌勤电气技术有限公司(西门子合作伙伴）
联系人：康奎(业务经理）发布(联系我有优惠福利哦）
地址：上海市松江区三新北路1800弄（松江商务电子园区）24号楼5005室.

CU305 Control Unit

附件
产品信息
组态工具

跳转到

概述

设计

集成

技术规范

概述

CU305 PN Control Unit

The CU305 Control Unit for the communication and open-loop/closed-loop control functions of a SINAMICS S110 is combined with the PM240‑2 Power Module in blocksize format (usable as of firmware V4.4 SP3) to create a powerful single drive.

设计

The CU305 Control Unit features the following connections and interfaces as standard:

Fieldbus interface
- CU305 PN: 1 PROFINET interface with 2 ports (RJ45 sockets) with PROFIdrive V4 profile
- CU305 DP: 1 PROFIBUS interface with PROFIdrive V4 profile
1 DRIVE-CLiQ socket, used solely to connect a DRIVE-CLiQ motor or a Sensor Module
1 onboard encoder evaluation for evaluating the following encoder signals
- Incremental encoder TTL/HTL
- SSI encoder without incremental signals
1 PE/protective conductor connection
1 connection for the electronics power supply via the 24 V DC power supply connector
1 temperature sensor input (KTY84‑130 or PTC)
3 parameterizable, fail-safe digital inputs (isolated), or alternatively 6 parameterizable digital inputs (isolated)
5 parameterizable digital inputs (isolated)
1 parameterizable, fail-safe digital output (isolated), or alternatively 1 digital output (isolated)
4 parameterizable bidirectional digital inputs/outputs
1 analog input ± 10 V, resolution 12 bit + sign
1 serial RS232 interface
1 slot for the memory card on which the firmware, parameters and licenses can be stored
1 PM-IF interface for communication with the PM240‑2 Power Modules in blocksize format (usable as of firmware V4.4 SP3)
2 test sockets and one reference ground for commissioning support
1 interface to the BOP20 Basic Operator Panel

集成

The CU305 Control Unit controls the PM240 2 Power Module in blocksize format (usable as of firmware V4.4 SP3) via the PM-IF interface.

A BOP20 Basic Operator Panel can also be snapped directly onto the CU305 for diagnostic purposes.

DRIVE-CLiQ motors can be connected to the integrated DRIVE-CLiQ socket as well as Sensor Modules (SMC) to permit the operation of motors without a DRIVE-CLiQ interface.

The status of the CU305 is indicated via multi-color LEDs.

The CU305 can be operated optionally with memory card. The firmware and project data are stored on the memory card pluggable from below, so that the CU305 can be replaced without the support of software tools. This memory card can also be used to perform standard commissioning on multiple drives of identical type. The card is available as an empty memory card or containing the latest drive firmware version. The card also contains the safety license for the Extended Safety Functions. To use these Extended Safety Functions, a memory card containing the safety license must be permanently inserted.

The CU305 and other connected components are commissioned and diagnosed with the STARTER commissioning tool.

Connection example of CU305 Control Unit

技术规范

CU305 PN / CU305 DP Control Units PROFINET: 6SL3040-0JA01-0AA0 PROFIBUS: 6SL3040-0JA00-0AA0
Current requirement At 24 V DC, max. without taking account of digital outputs and DRIVE-CLiQ supply	0.8 A for CU305 incl. 350 mA for HTL encoder + 0.5 A for PM240‑2 Power Module
Conductor cross-section, max.	2.5 mm²
Fuse protection, max.	20 A
Digital inputs	in accordance with IEC 61131‑2 Type 1 3 isolated fail-safe inputs 5 isolated digital inputs
Voltage	-3 ... +30 V
Low level (an open digital input is interpreted as "low")	-3 ... +5 V
High level	15 ... 30 V
Current consumption at 24 V DC, typ.	6 mA
Delay time of digital inputs ¹⁾, approx.
L → H	15 μs
H → L	55 μs
Delay time of high-speed digital inputs ¹⁾, approx. (high-speed digital inputs can be used for position detection)
L → H	5 μs
H → L	5 μs
Conductor cross-section, max.	1.5 mm²
Digital outputs (continuously short-circuit-proof)	1 fail-safe digital output 4 bidirectional digital inputs/digital outputs, not isolated
Voltage	24 V DC
Load current per digital output ²⁾, max.	100 mA
Delay time ¹⁾, approx.	150 μs
Conductor cross-section, max.	1.5 mm²
Analog input	-10 ... +10 V Resolution 12 bits + sign
Internal resistance	15 kΩ
Encoder evaluation	Incremental encoder TTL/HTL SSI encoder without incremental signals
Encoder supply	24 V DC/0.35 A or 5 V DC/0.35 A
Input current range TTL/HTL	2 ... 10 mA (typ. 5 mA)
Encoder frequency, max.	500 kHz
SSI baud rate	100 ... 250 kBaud depending on cable length
Resolution absolute position SSI	30 bit
Cable length, max.
TTL encoder	100 m (328 ft) (only bipolar signals permitted) ³⁾
HTL encoder	100 m (328 ft) for unipolar signals 300 m (984 ft) for bipolar signals ³⁾
SSI encoder	100 m (328 ft)
Power loss	<20 W
PE connection	M5 screw
Dimensions
Width	73 mm (2.87 in)
Height
CU305 PN	195 mm (7.68 in)
CU305 DP	183.2 mm (7.21 in)
Depth
CU305 PN	71 mm (2.80 in)
CU305 DP	55 mm (2.17 in)
Weight, approx.	0.95 kg (2.09 lb)
Certificate of suitability	cULus

¹⁾The specified delay times refer to the hardware. The actual reaction time depends on the time slice in which the digital input or output is processed.

²⁾ In order to use the digital outputs, an external 24 V power supply must be connected to terminal X124.

³⁾ Signal cables twisted in pairs and shielded.