70W Single Output Series
High reliability, low cost
Built-in EMI filter
100% full load burn-in test
Protections: overload/ short circuit
1 year warranty
F605 160 x 98 x 39(mm)
AC input voltage range ................... 170~264VAC (210~370VDC)
Input frequency .............................. 47~63Hz
Inrush current .................................. cold start, 40A/230V
Input leakage current ...................... 0.7mA/ 230VAC
Line regulation (full load) ................. 0.5%
Output voltage adjust range ........... 10%
Output overload protection ............. 110~150%
Withstand voltage ........................... I/P -O/P: 1.5KVAC/1min
I/P -F/G: 1.5KVAC/1min
O/P-F/G: 0.5KVAC/1min
Rise time ......................................... 50ms@full load (typical)
Hold up time .................................... 20ms@full load (typical)
Operating temp. & humidity ............ -10 ~+50 , 20%~90%RH (non condensing)
Storage temp. & humidity ............... -20 ~+85 , 20%~95%RH (non condensing)
Safety standards ............................ design meet GB4943, UL60950, EN60950
EMC standards ............................... design meet GB9254, EN55022 classA
EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11
Cooling method ............................... convection
Model DC Output Load regul. R&N Efficiency
HF70W-S-12 12V 6.0A 0.5% 100mV 78%
HF70W-S-15 15V 4.7A 0.5% 100mV 79%
HF70W-S-24 24V 3.0A 0.5% 120mV 82%
HF70W-S-27 27V 2.6A 0.5% 120mV 82%
HF70W-S-48 48V 1.5A 0.5% 150mV 83%
* 12~48VDC output all available.
Drawing