BFM11-16-1W高电压并联电容器
用途 APPLICATIONA
高电压并联电容器主要应用于50Hz或60Hz交流电力系统以改善功率因数，产品性能符合GB3983.2-89《高电压并联电容器》及国际标准 IEC60871-1.
The products are applied to 50Hz or 60Hz AC electrical power system for powerimpr-oving and will be according to the national standard GB 3983.2-89(high voltage shunt capacitor)and inter national IEC60871-1.
使用条件SERVICE CONDITIONS
1、海拔高度不超过1000m,环境空气温度-40℃～+40℃
2、安装场所无剧烈的机械振动、无有害气体及蒸汽、无导电性及爆炸性尘埃
3.连续运行电压1.0Un,长期过电压最高值不超过1.1Un
4.稳定过电流（包括谐波电流）不超过1.43In
5、最大允许容量不超过1.35Qn.
1、Alitude lower than 1000,ambiedt temperature-40℃～+40℃
2、No strong mechanical? vibration at installing place.No corrosive? gas,insuctive sust,and in flammable and explosive media in the ambient environment.
3、Continuous? operating voltage is 1.0Un.The highest voer-valtaeg value for long time op eraion will not exceed 1.1Un.
4、Steady-state voer current(include harmonic? current )will not exceed 1.43In.
5、The max capacity will not more than 1.35Qn.
型号说明 MODEL MEANINGS
液体介质代号
W-浸渍剂为烷基苯
A-浸渍剂为二芳基乙烷
A-浸渍剂为苄基甲苯
Liquid dielectric code
W-Impregnant is AB
F-Impregnant is PXE
A-Impregnant is benzy lbenzoic
固体介质代号
F-聚丙焟薄烯薄和电容器纸复合介质
M-全薄膜介质s
F-聚丙烯薄和电容器纸复合介质
M-全薄膜介质 Solid dielectric code:
F-Composite medium of polypropy lenefilm and capacitor paper
M-complete film medium

BFM11-16-1W 11 16 0.42 1(3)
BFM11-18-1W 11 18 0.47 1(3)
BFM11-30-1W 11 30 0.79 1(3)
BFM11-40-1W 11 40 1.1 1(3)
BFM11-50-1W 11 50 1.3 1(3)
BFM11-100-1W 11 100 2.6 1(3)
BFM11-200-1W 11 200 5.3 1(3)
BFM11-334-1W 11 334 8.8 1(3)